Come installare Leopard sul tuo PC
Ebbene sì: a meno di due mesi dal lancio dell’ultima versione di Mac OS X, nome in codice Leopard, è arrivato il giorno di dolore per tutti gli integralisti della mela. Mac OS X 10.5 Leopard, per la gioia di tutti i possessori di normali PC che non ne possono più di Windows Vista, è installabile in modo semplice ed intuitivo anche su computer non della Apple perchè qualche hacker è riuscito a patchare il kernel ed i suoi moduli in modo da poter essere installati anche su computer che non hanno un BIOS EFI, ovvero dei comuni PC.
Ovviamente l’operazione non credo sia legale e se vi apprestate a provare nonostante tutto l’ultima versione del sistema operativo della Apple sul vostro PC un pò per gioco, un pò per sfida ed un pò per vedere come funziona ed assaporare cosa vi perdete quotidianamente, vi invito a controllare che il vostro hardware sia supportato da Mac OS X perchè qualora non lo fosse potrest incontrare non pochi problemi.
Ecco i passi principali per effettuare l’installazione di Leopard sul vostro PC:
- scaricate il file ISO di Leopard per x86 da Mininova (preferisco non linkare il torrent un pò per scaramanzia, un pò per non avere problemi di qualsiasi genere, in ogni caso basta andare su Mininova e cercare “iATKOS v1.0i”. Si tratta di una ISO di all’incirca 2.09 GB quindi non è difficile da trovare);
- masterizzate l’immagine ISO su DVD con il vostro programma di masterizzazione preferito;
- inserite in DVD nell’unità ottica del vostro computer e seguite le istruzioni che vedrete a video;
- l’installazione dura circa un’ora quindi nel frattempo se c’è qualcosa di interessante in TV è l’occasione giusta per vederlo o se siete degli amanti delle lunghe pause caffè potete concedervene tranquillamente una.
[via Dailyapps]
Tutto molto semplice e veloce. Se volete provare Mac OS X senza che nessun altro lo sappia è un ottimo metodo. Ovviamente io non ho un PC, non ho potuto testare quanto sopra e non potrò esservi di aiuto. Se però qualche impavido ha del tempo da perdere e vuole testare il tutto e farci sapere come va gliene saremo tutto eternamente grati.
La curiosità è cosa buona, ma installare un sistema operativo su una macchina non testata per lo stesso, è una cosa molto sbagliata e insensata, perchè il SO OSX è performante su macchine dedicate punto e basta. Ciao
Si chiama curiosità, caro Germano e da sempre manda avanti il mondo.
Ma perchè non lasciate perdere? Volete a tutti i costi sfidare la vostra buona sorte per che cosa? Se volete provare Mac OSX compratevi un Mac, risparmierete soldi e tempo e incazzature….oppure compratevi un clonemac, ma non avrete mai un Mac che si rispetti tra le mani, ma solo una brutta copia (hardware) che funziona zoppicando, leggetevi la prova del clone della phistar e capirete…ciao
forse a qualcuno puo’ servire…. domani inizio io, vedremo
DUAL BOOT LEOPARD AND WINDOWS VISTA
Here is a complete guide to get a Dual boot setup with Windows Vista and Leopard running side by side. Please note this is a complete tutorial and if followed exactly you should be running Leopard and Vista side by side without any problems.
Yes, this guide has taken over a month for me to write and I have tried this out every possible combination of hardware setup I could possibly test, and I can assure you that if followed correctly you can easily have Leopard and Vista in a dual boot setup.
Loads of readers have sent me emails, dropped comments on my previous guides on installing Leopard and here is the guide for all you guys who waited so long patiently.
Well before we proceed with the guide, here is the stuff that you will need for a successful dual boot setup.
• Vista Already installed on your Primary Hard Disk.
• iATKOS v1.0 DVD. (Do not ask me where you can download this)
• Windows Vista Boot DVD (Just incase something goes wrong)
Well now that you have everything ready, lets get started then. Please note this is going to take sometime so I suggest you have some Music playing near by and grab yourself a cup of coffee while you do this. Sit tight, here we go……….
• Install Vista on the First Partition of your Hard Disk. I am not going to elaborate into How to install Windows, I hope everyone knows it. If you already have it installed then read on..
• Right click on My Computer and Click on Manage. Select Disk Management. Now Create a new Volume for OSX by shrinking an existing volume. You need atleast 5GB of space and the new volume should show up as Unallocated.
• Make sure that the partition shows up as Unallocated, else repeat the previous step.
• Now restart the machine and boot into the Leopard DVD that you burned using the iATKOS v1.0 DVD Image.
• Press F8 as the countdown begins and type -v at the prompt and hit enter.
• You should see scrolling text on the screen now. If it stops anywhere then drop a comment and I’ll try to help you out.
• After a while you should be looking at the Leopard Installer. Follow the instructions on Screen.
• Once the Loading Bar vanishes Select Utilities -> Disk Utility .
• Select the Volume you created previously and format it as MAC OSX Journaled Extended. Once the formatting is done the volume is ready for installation.
• Now Close Disk Utility and Select Utilities -> Darwin Boot. Type Y at the prompt.
• At the prompt when it asks for the Disk Number enter 0. For the Partition Number if your Leopard Partition is 2nd on the disk, then enter 2 and so on.
• Accept the following prompts and you should see a success prompt saying that so many block of data were written successfully.
• Now get back to the Leopard Install Screen. Choose the partition that you made in the beginning and follow the instructions on screen.
Please don’t select any patches etc during the installation, this is normally the reason for most failed installations. Just the plain install would do.
• Once the Install is done, reboot with the DVD in the drive. Press F8 at Darwin Boot Loader and type -s and press enter.
• Execute the following commands :
fdisk -e /dev/rdisk0
flag 1
quit
reboot
• Now before the PC restarts remove the DVD. At this point you should be able to boot into Vista normally.
Note: If you are unable to log into windows, because there is an error which says “winload.exe” correupted.! Relax. Just insert the Windows VISTA boot DVD into the drive and restart. Click on “Repair computer” once you are inside the DVD and it will automatically detect if a problem exists and suggest “Repair and Restart”. Press the same, and remove the DVD once the PC is about to restart. You should now be able to log in to vista without any problem.
• Now that we have almost everything running fine, lets proceed with the dual boot setup.
• Boot into Vista. Copy the chain0 file from the Leopard DVD to C:
• Open the “Command prompt” with “Elevated Admin” privileges from the Start Menu.
• Type the following into the prompt
bcdedit /copy {current} /d “Mac OS X”
bcdedit /enum active
bcdedit /set {GUID} PATH \chain0
In the first command type {current} as it is, literally..nothing else..just {current} with the brackets. In the 3rd command however, replace the {GUID} with the alphanumeric GUID you see in the enumerated list under MAC OS X. You can see this list on your terminal as soon as you type the 2nd command above.
• Close the Command Prompt and Restart Vista.
• You Should now be looking at a screen with two options to boot into Mac OSX or Vista.
• Select Mac OSX to see if you can boot into it. You should see the familiar Darwin boot Loading screen with the timer going down. If you dont do anything, then it counts to zero and again shows the menu screen with Vista and MAC OSX options. Dont panic!
Again select MAC OS X, and now as the timer counts down, Press F8. You would see a list of partitions on your disk with their names. Select the partition with MAC OSX installed by using up/down arrows and press ENTER.
• Voila!! your Mac should be booting up as you read this..
See it was that simple. No more HFS+ and Blinking Cursor errors. Just follow this guide step by step and you should be able to dual boot Windows Vista and Leopard in no time. If you have any questions just drop in a comment, I’ll reply at the earliest.
For Drivers and Patches I suggest you look at the InsanelyMac Forums. This guide would have been nearly impossible without :
• Uphuck Forums
• InsanelyMac Forums
• OSX86 Wiki.
If you are looking to Install Leopard on an AMD based machine follow the instructions here to patch your iATKOS v1.0 Image. Special Thanks to I Am Nihilist
a me dopo l’installazione e il riavvio si carica la mela ma mi appare subito il kernel panic
cosa
devo fare?
Aiutatemi pliz! È un mese che cerco di installare Leo
Ciao, ma per scaricare il file di installazione di mac ci vuole qualche programma tipo bitorren perchè mi scarica un file che il pc non mi riconosce e poi la sua dimensione non è di 2 GB. FATEMI
SAPERE CIAO…
Ho un portatile Toshiba Tecra S2. Ho installato la iatkos v_1.0. L’installazione va a buon fine ma dopo il restart la macchina dopo il messaggio Toshiba non fa partire il sistema operativo. Sarà perchè l’HDD è un Pata invece che Sata? E non c’è modo di bypassare la cosa? Ho seguito le istruzioni, usato MBR una volta, e GUID un’altra volta, customizzato l’installazione scegliendo solo quello che mi serviva, formattato l’Hard disk vergine in HFS+ Mac OS extended (Journaled). Un problema è che la mia scheda video (GeForce 6600 ha solo 64 mb) e il driver parte da 128 e quello ho scelto).Quali sono le opzioni da selezionare all’installazione? E come setto il mio bios (v. 2.80)? Pensavo di essere arrivato invece…….
Che altro posso fare oltre al limite cambiare versione?
Lascia un tuo commento!
Rimani aggiornato
Abbonati ai miei Feed RSS
Articoli | Commenti
oppure ricevi gli aggiornamenti via e-mail:
Scopri cosa sono e come usare i Feed RSS
La tua pubblicità qui? Scopri come...
In prima pagina
Commenti Recenti
@Giovy Un icona "I tuoi files"... mmm mi...
Io ho un coniglio ( quel coniglio)...
Porta USB e lettore SD servono per...
Ciao ti segnalo un altro Social News...
Grazie per la guida.. ma io mi...
ciao bello il filmato cyberduck ma mi...
Ma mi chiedevo una cosa come faccio...
io la prenderei molto volentieri...
La curiosità è cosa buona, ma installare...
ciao davide scusa il disturbo, ho notato che...
Meta
Scelti a caso
Più commentati
Qualche scatto
Tutto il materiale è coperto da Licenza Creative Commons | Per maggiori informazioni.
Articoli (RSS) | Commenti (RSS) | Torna su